职位描述

Principal millimeter-wave/RFIC design lead will have a critical role in developing innovative circuits for Satcom and 5G networks and 雷达 systems, mainly focusing on 高 performance circuits in silicon technologies. In this 高ly visible position, you will operate as a hands-on design manager and will be responsible for the development of the-状态-of-the-art millimeter-wave transmitter/receiver front-ends. You will lead the 团队 that work on the circuit topologies for 下一个 generation communication and 雷达 systems. We are looking for 高ly motivated and talented problem-solvers with strong 后退ground in 高 performance front-end design at microwave/mmwave frequencies as well as solid EM and communication systems 后退ground.

职责 

• Design 状态-of-the-art mmwave circuits such as power amplifiers, low-noise amplifiers, phase shifters, variable-获得 amplifiers, mixers, multipliers, and synthesizers at mm-wave frequencies, focusing mainly on silicon technologies.
• Develop mm-wave transmitter and receiver front-ends and determine the system 建筑学 for the complete signal chain from antenna to bits.
• Determine the IC level implications of system-level 要求 of 下一个 generation communication networks.
• Design and simulate on-chip EM structures and work on co-optimization of IC/包裹 interfaces.
• Lead the overall chip development activities by taking responsibility for chip-level integration and optimization as well as design resource management.
• Lead a 高ly productive mmWave design 团队 through hands-on guidance and present the 团队’s work to the executive 团队.

要求

• 15+ years of experience in millimeter-wave/RFIC design in SiGe, CMOS, and SOI technologies.
• Extensive experience in various circuit topologies for amplifiers, mixers, 开关, synthesizers specifically at 高 frequency and with fully on-chip integrated implementations.
• Strong know-how and hands-on expertise in analysis and optimization of transmitter and receiver front-ends in response to complex modulated waveforms. This includes practical modeling and circuit simulations of transmitter/receiver chains with time sampled waveforms.
• Extensive experience in hands-on mmwave IC characterization and debugging
• Experience with analog building blocks such as op-amps, bias generators, temperature sensors, LDOs and ADC/DAC implementations.
• Proficiency in EM simulations both for on-chip and 包裹 parts.
• Prior experience in leading design 团队s through the whole NPI cycle of complex RF/mmWave front-end ICs.
• Understanding of post-silicon qualification procedures such as ESD and HTOL.
• Good communication skills and effective 团队work.