搜索 for a product

F6122

16-ch Dual-beam Rx Active Beamforming IC, Ka-Band SATCOM, 17.7GHz–21.2GHz

产品详情

0
1
2
3
0thubnail
1thubnail
2thubnail
3thubnail
  • 17.7GHz – 21.2GHz operation
  • 支持s 4 dual-pol or 8 single-pol elements
  • Two simultaneous and independent beam outputs
  • 360deg phase control with 6-bit resolution
  • 26dB 获得 control with 0.45dB 步 size
  • 2.3V nominal single supply input
  • Standard 1.8V digital logic
  • IDAC for external LNA biasing
  • Temperature compensation
  • Temperature sensor w/ digital readout
  • Advanced digital modes with fast beam 方向盘
  • On-chip beam-状态 memory
  • 3.8 x 4.6 x 0.9 mm, 63-pin FC-BGA

The F6122 is a 16-ch dual-beam receive active beamforming RFIC designed for 应用 in Ka-Band SATCOM planar phased array antennas. The IC has eight RF input ports, two RF output ports and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the IC may be driven by eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA). Each channel has 6-bits of digital phase and 获得 control resolution spanning 360° and 26dB of dynamic 范围, enabling precise beam pattern and polarization control.

The IC operates from a single supply of 2.1V – 2.5V. When paired with the Renesas F6922 LNA, it achieves a nominal cascaded 获得 of 30dB, while minimizing the front end feed loss due to the flexibility of LNA physical placement near the antenna feeds. The chip includes power management 特征 such as a low power standby mode, independent enable controls on every channel and programmable single beam mode. The device SPI bus and control pins operate from standard 1.8V logic at speeds up to 50MHz. Advanced digital modes and large on-chip memory allow for < 100ns beam position switching times at the array level, greatly reducing dead time and latency.

Finally, the compact and CTE-matched FC-BGA organic 包裹 with all single-ended 50? matched RF ports and 0.5mm pitch greatly simplifies the physical integration of these devices onto large antenna panels.

产品文档

Product Brief

2025-08-25

Beamforming Ics for Satcom and 雷达 Active Antennas

pdf | 0 Bytes
Model - IBIS

2025-08-25

F65xx and F61xx IBIS Model

ibs | 0 Bytes
应用 Note

2025-08-25

F612x BFIC + F692x LNA Connection 应用 Note

pdf | 0 Bytes

Design & Development (Boards and Kit)

Board Image

Evaluation System for the F6122

The Renesas F6122SEVS Evaluation Kit is designed to reduce the learning cycle, build system-level confidence and enable a rapid time to market with the F6122 IC. The kit includes all the essential components required for the rapid validation and evaluation of the electrical performance characteristics of the F6122 Active Beamforming IC. 

Included Components:

  • RFIC Evaluation Board
  • Digital Interface Board
  • USB Cable (USB-A to USB-B micro)
  • Power Supply Cable
  • Digital Interconnect Cable
  • Renesas Beamforming Evaluation Kit Software and Device Drivers (web download)
  • RF De-Embed Files (web download)

您还有其他问题吗?

我们致力于帮助您探索各种可能性,优化性能,并推动技术进步。立即联系我们!

与销售人员交谈