产品详情
- Low insertion loss: 1.4dB at 2000MHz
- Typical/Min IIP3: 65dBm/47dBm
- Typical/Min IIP2: 95dBm/87dBm
- 33.6dB attenuation 范围
- Bidirectional RF ports
- +34.4dBm Input P1 dB compression
- VMODE pin allows either positive or negative attenuation control response
- Linear-in-dB attenuation characteristic
- Supply voltage: 3.15V to 5.25V
- VCTRL 范围: 0V to 3.60V (when VDD = 3.9V to 5.25V), 0 to (VDD - 0.3V) (when VDD = 3.15V to 3.90V)
- +105 °C max operating temperature
- 3mm x 3mm, 16-pin TQFN package
The F2258 is a low insertion loss Voltage Variable RF Attenuator (VVA) that covers a broad frequency 范围 from 50MHz to 6000MHz. In addition to providing low insertion loss, the F2258 provides 高 linearity and low return loss performance over the entire frequency, voltage control and attenuation 范围s. The device uses a single positive supply voltage of 3.15V to 5.25V. 其他 特征 include the VMODE pin allowing either positive or negative voltage control slope vs. attenuation and multi-directional operation meaning the RF input can be applied to either RF1 or RF2 pins. This device has a wide control voltage 范围 using either a positive or negative control voltage slope.
- Base Station 2G, 3G, 4G,
- Portable Wireless
- Repeaters and E911 Systems
- Digital Pre-Distortion
- Point-to-Point 基础设施
- Public Safety 基础设施
- Satellite Receivers and Modems
- WiMAX Receivers and Transmitters
- Military Systems, JTRS Radios
- RFID Handheld and Portable Readers
- Cable 基础设施
- Wireless LAN
- Test/ATE Equipment
您还有其他问题吗？
We're here to 帮助 you 探索 possibilities, optimize performance, and drive technological advancements. Reach out today!
与销售人员交谈